Automatic winding machine is a device used for automatically winding coils, widely used in industries such as electronic components, motors, transformers, etc. The following automatic winding machine manufacturer will provide a detailed introduction to the usage of the automatic winding machine:

1. Power on preparation: First, make sure that the automatic winding machine is connected to the power supply and the working environment is clean and tidy. Next, turn on the switch of the automatic winding machine and wait for the system initialization to complete.

2. Adjust parameters: Set appropriate winding speed, number of coils, winding angle, and other parameters according to actual needs. Usually, these parameters can be adjusted on the control panel of the automatic winding machine.

3. Place the wire: Place the wire that needs to be wound on the spool of the automatic winding machine, ensuring that the wire is intact and free of knots. Next, introduce the wire into the winding head of the winding machine and fix the wire head.

4. Start winding: After confirming that all parameters are adjusted correctly, press the "Start" button, and the automatic winding machine will start winding the coil. During the winding process, parameters can be adjusted or the winding can be stopped at any time as needed.

5. Complete winding: After the coil winding is completed, the automatic winding machine will automatically stop working. At this point, the wound coil can be removed and relevant inspections and tests can be conducted.

6. Fault handling: If there is a malfunction or abnormality during use, the machine should be stopped immediately and the fault should be eliminated. Common faults include wire breakage, coil deviation, etc., which need to be dealt with in a timely manner.

7. Regular maintenance: In order to ensure long-term stable operation of the automatic winding machine, the machine should be cleaned, lubricated, and maintained regularly. At the same time, attention should be paid to checking whether the components are functioning properly and replacing worn parts in a timely manner.

In summary, the usage method of an automatic winding machine is not complicated. As long as the above steps are followed, the winding work can be easily completed. At the same time, paying attention to safety and using equipment correctly can improve work efficiency and ensure product quality. I hope the above content is helpful to you.